Cellular Interface	Antenna	2x SMA-K Note: North America models: 2 x SMA 4G antenna connectors.
Cellular Interface	SIM card	1 x (3 V & 1.8 V) Standard 2FF SIM, drawer-type sim card slots
Ethernet	1 x WAN port, 10/100 Mbps, compliance with IEEE 802.3, supports auto MDI/MDIX,1.5KV network isolation transformer protection
Ethernet	4 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX,1.5KV network isolation transformer protection
Indicators	LED	PWR: red,always on after powered on Work: green,blinking when the router is ready and working properly WLAN: green,always solid on when WiFi is enabled and working properly USR:user defined. Net indicator: Red always on after connected to 2G network Green always on after connected to 3G network Orange always on after connected to 4G network Signal strength:3 solid bars,strongest signal
Terminal block	Pinout	V+,V- : 2 cores terminal power supply socket,built-in power supply phase-reversal protection GND:groundterminal Tx/B:RS-232/RS485pin(setupby software) Rx/A:RS-232/RS485pin(setupby software) DI:2 x Digital input,passive switch DO:2 x Digital open collector output, max output 36 V, 300 mA COM: common terminal,use in conjunction with DOs
WiFi Interface	Standards & Frequency	IEEE 802.11b/g/n,2.4GHz, AP mode
	Data speed	IEEE 802.11b/g,maximum 54Mbps.IEEE 802.11n,maximum 150Mbps
	Antenna	2x RP-SMA-K
	Transmission distance	80 meters by line of sight.Actual transmission distance depends on environment of the site.
Power Supply	Adaptor	DC 12V/1A
	Connector	DC Power Jack Barrel Type Female 5.5*2.1mm Round socket or industrial terminal block,reverse polarity protection
	Input voltage	DC 9~36V
	Working power	Average 522mA/12V, Maximum 811mA/12V
Serial Interface	RS485/RS232(alternative)	industrial terminal block. Note:RS232 default.
	Baud rate(bps)	1200,2400,4800,9600,19200,38400,57600,115200,230400
	Data bits	8
	Stop bits	1,2
	Parity	NONE,ODD,EVEN
Physical Characteristics	Housing	Metal shell,IP30
	Dimensions	125.0103.045.0mm (LWH,antenna pedestal,terminal block and DIN Rail are not included)
	Installation method	Ear mounting, DIN-Rail mounting
	EMC	StaticIEC61000-4-2, level3 Pulsed Electric FieldIEC61000-4-4, level3 SurgeIEC61000-4-5, level3
	Operating temperature	-20℃~+70℃
	Storage temperature	-40℃~+125℃
	Operating humidity	5%~95%RH(non-condensing)
Others	Reload	Pinhole button,restore factory defaults/firmware resume/firmware upgrading with USB
	TBD	Debug interface (TTL Level)
	USB	Firmware upgrading
	TF	TF card slot
	Ground protection	Screw
	Embedded Watchdog	Device runs self-detection, auto recovers from malfunctions

Our advantage

Inquiry Cart 0